One-way bearing with gear (bendex) SHINERAY

One-way bearing with gear (bendex) SHINERAY. The photo marks Ø 122 mm and 59T at the gear, Ø 88 mm at the bendex, Ø 22 mm for the bore and 19,5 mm for the overall width.

• You are buying two parts: a separate one-way bearing with three holes in the flange, and a gear with a bronze bush
• 59 teeth and Ø 122 mm set this item apart from the CG125 and ATV200 line, where it is always 57 teeth and Ø 118 mm – count your teeth before ordering
• What each dimension measures, the maker did not write, so we do not assign them a meaning – we compare number with number
• The bendex alone without the gear is a separate item in the listing – "One-way bearing (bendex) ATV200" with an 88 mm outer diameter and three holes
• The one-way bearing (bendex) lets the starter turn the engine over and disengages once the engine starts; when worn it slips – the starter howls and the engine does not move
• The bearing is replaced when play appears, when you hear a hum or crackle while turning it by hand, or when the rollers leave visible marks on the track
• Supplier code WI ZQI02160 – quote it again when you order

To be straight with you: which SHINERAY models and years this pair is for, the maker did not list. The maker did not say which specific model and year it is for, and we do not guess – write us your model and year. Before ordering, measure your bendex's outer diameter, the shaft bore and the spacing of the mounting holes – or send a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56