One-way bearing (bendex) sprocket ATV200

One-way bearing (bendex) sprocket ATV200. The maker stamped "57 teeth" on the part itself, and the outer diameter is 118 mm; the one-way bearing itself is not here, only the sprocket.

• Other marked numbers: 34 mm and 27 mm on one side, 27 mm, 22 mm and 42 mm on the other
• Which dimension measures what, the maker did not write, so we do not assign meanings to them – we match number to number
• The photo shows a bush welded to the sprocket – the weld seam is clearly visible, so the bush cannot be removed
• There is a SECOND ATV200 sprocket in the list – "One-way bearing (bendex) sprocket ATV200"; it also has 57 teeth and Ø 118 mm, but the bush is different: Ø 38 mm with a 19 mm bore, and a total width of 18,5 mm. Compare the bush, not the teeth
• The sprocket is replaced when the teeth are broken off or worn to a point, and the bush – when the shaft sits in it with play
• Supplier code MC 04196 – state it again when ordering

To be straight with you: the "57 teeth" marking was made by the manufacturer on the part itself; we did not count the teeth ourselves, and which end the bush is fitted from, the manufacturer did not explain. Which specific model and which years it fits, the manufacturer did not write, and we do not guess – write us your model and year. Before ordering, count your sprocket's teeth and measure its diameter and the bush bore – or send us a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56