Taillight LED red glass

Rear LED taillight with red glass: the glass shows the markings "12V" and "E11" in a circle, the drawing gives 70 mm, 45 mm and 110 mm, and five wires come out of the cable. Before ordering, measure the mounting spot.

• The light is fixed to a bent silver-coloured bracket with an elongated hole at each end; two bolts with nuts and washers pass through a black gasket on the back of the bracket
• We measured the line ends: 70 mm — between the two threaded studs on the back of the light, 45 mm — between the two bolts on the gasket, and the 110 mm lines end at both elongated holes of the bracket
• Next to "12V" on the glass there is a power marking with a W, but we cannot read its number clearly in the photo; after "E11" there is another line with a number
• On the left of the glass there are two arrow-shaped ribs; the LEDs are visible through the glass in two rows
• Five wires — green, white, red, yellow and black — each with a cylindrical terminal
• The photo has neither wire-function marks nor model fitment

We write only what we know. We can read the voltage "12V" on the glass, but not the power number, so we do not write it. Which of the five wires connects where, the maker did not write, and we do not guess it: a wrongly connected LED light may fail to light up or may fail altogether. Before ordering, measure the distances between the mounting holes where you will fit the light, send us a photo of the old part — we will check it before you order.

24-month warranty · tel. +370 685 777 56