Shock absorber height between axes 235mm spring 7mm

Rear shock absorber: the name gives 235 mm between the eye centres and 7 mm spring wire, and the photo adds 260 mm overall length and Ø 10 mm eye holes.

• The photo has every size needed to choose by: 260 mm overall length, 235 mm between the eye centres, Ø 10 mm holes in both eyes, 7 mm spring wire and a 10 mm rod diameter. We measured them off: the 260 mm line matches the outline of the part, and the 235 mm rests on the eye centres
• To be straight with you: the photo on this page is not a separate picture of this product. We laid the photos point on point — it matches the photo on the neighbouring page, and only the figures written on it differ. So we do not describe the look as its own, and go by the markings alone
• The neighbouring page is the same 235 mm length but with 8 mm wire. The photos differ by a single character: "7" against "8"
• Thinner 7 mm wire gives a softer ride at the same length. That is the only difference the maker stated
• Measure from the centre of one eye to the centre of the other — that is the length the name gives. The whole length of the part, out to the edges of the eyes, is always greater; on some photos it is given as a figure of its own, on others it is not there
• The second size that has to match is the eye hole: a bolt thicker than the hole will not go in, and a thinner one will let the eye rattle
• Time to replace it when oil is weeping from the rod, when the spring has sagged or when a loose bush in the eye knocks over bumps
• The shock absorbers of this range sit in two categories in the shop — some in the "Chassis & suspension" section, some in the "Shock absorbers" sub-category. If you do not find the right length here, open the second one too

To be straight with you: which end's eye goes to the frame and which to the arm is not marked on the photo — both eyes are the same, Ø 10 mm. Which exact model and which years this product is for, the maker did not state, and we do not guess — but matching dimensions is something we can do: write us your model and year. Before ordering, measure your old shock absorber from eye centre to eye centre, and the diameter of the eye hole — or send a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56